6 Ways to Train The Multisport Athlete for In-Season Domination

Winter sports are starting to wrap up, and a large majority of your student athletes are ramping up to begin their spring sport seasons.  

With track and field, lacrosse, and baseball - a hefty percentage of your football team will be largely unavailable for the next three months. This increase in the volume of your athletes participating in spring sports makes it a tricky time to program their strength training.

Still, it is vital for you to ensure that they continue to build their absolute strength and explosive power. Failure to do so will make any work you did over the winter useless and a blatant waste of time.  

Without any maintenance work, strength levels begin to decrease after two weeks. You will have to program a very specific approach if you want to ensure your athletes continue to see progress with their strength and power development.

Of course, you will have scheduling issues. You will have to be very careful not to program too aggressively, causing an excessive level of fatigue. Remember, when your athletes are in another sport, the worst thing you can do is beat them down to the point where their performance is hindered.  

If you provide them with a structurally sound program, their performance will not be impacted. And you will be able to maintain support from the spring sport coaches.  

College Squat.jpg

So, how do you approach programming for your multi-sport athletes?

Here are my ‘Multi-Sport Big 6 Strategies' you will want to include in your programming to ensure your athletes continue to build strength while performing at a high level in their spring sport.  

1. Use Cluster Sets

Cluster sets are a series of low rep sets (1-3 reps) performed for 6-10 sets. The key is to do a set every 45-60 seconds and be above 80% of the athletes 1 rep max. This allows you to do a high volume of strength/power work while limiting the fatigue on the body.  

Your sets would look about like this:

  • 10X2 @ 90% with a set starting every 60 seconds.
  • 6X3 @ 85% with a set starting every 45 seconds.

This allows you to do two things:

  1. It allows you to get 18-30 reps in at 80% or above which builds power.
  2. Since the per-set rep range is low, it will limit fatigue when compared to a rep scheme of 4X6 or 5X5. You’ll get the same total reps in just in a way that limits fatigue and builds power.  

2. Limit Eccentric Movements

The great majority of muscle fatigue and soreness comes from the eccentric (lengthening) phase of a movement.

By limiting or removing the eccentric phase you will allow your multi-sport athletes to be able to train heavy without having a high level of soreness the following days.  

repboards_3_large.jpg

Some great ways to limit or remove the eccentric phase of big lifts are:

  • Deadlifts w/ a drop at the top (removes the lowering phase)
  • Bench Press using boards
  • Sled Marches, Sled Drags, and Tire Flips  

3. Be Strategic with Your Heavy Squat Days

If you know your athletes in-season competition schedule, you can be strategic with what days you program your heavy squat work.

If your athlete has a 5-7 day break between games or matches use that gap to program a heavy squat day directly following their previous competition. 

For example, if they had a game on a Friday and don’t play again until Wednesday, use Saturday to squat heavy. This gives them three days to recover before their next game or match.

Note: Don’t be a dick with your heavy squat programming. Push them but don’t do something stupid like 10X10. 

4. Program Throws, Jumps, and Bounds

Throws, jumps, and bounds are one of the best ways to build explosive power. In addition, they put a very low level of fatigue on the athletes.

rugby-strength-3.jpg

All three of these should be a year-round staple of your program. However, when an athlete is in-season, the volume of jumps, throws, and bounds should increase.  

Throws, jumps, and bounds are a great substitute for Olympic lifting as they teach the triple extension and they allow the athlete how to generate power very rapidly.  

5. Limit Volume on Accessory Work

With in-season athletes, the amount of time they have to train is very short. Your goal should be to get the big lifts in and then get them out of the weight-room. During this time an athlete does not need to spend 15 minutes doing arms and shoulders.  

Often times high volume accessory work is a major cause of fatigue and should be avoided during an in-season phase. 

Rather than doing a massive amount of accessory work, program a low volume of accessory work targeted toward injury prevention.

For example, give your baseball players shoulder stability work and your lacrosse athletes stability drills for their ankle/knee/hip complex.  

6. Include a Nervous System Reset After Each Training Session

This is a big one. When you combine practices, games, and strength training sessions many athletes can have up to 10 ‘training’ sessions in a week. This takes a massive toll on the nervous system and can lead to overtraining.

After every strength training session take 5 minutes and reset your athlete’s nervous system with a wall stretch variation that includes diaphragmatic breathing.

I like to have the athletes lay down on their backs with their feet up on the wall at a 45-degree angle. Have them close their eyes and take a few minutes to do some slow breathing drills.  

Start with a 4-4-4 breathing cycle that has a deep inhale for four seconds followed by four seconds of retention and four seconds of a forceful exhale.  

How Often And How Much?

Now, with all that information the question arises of how many training sessions should be done during the week.  

  • Typically, I recommend starting with three days per week during the pre-season and non-conference play. Then cut it down to two days per week once the season ramps up into more important competition.  
  • The training sessions should be limited to 45 minutes and scheduled at convenient time for both the athletes and the in-season coach.  

Remember, the most important thing is that you provide your athletes with a program that allows them to build strength and power while allowing them to play at a high level with their in-season team.

If you follow this and are smart about your programming, you will have an athlete that hits the ground running in your summer training program.

ARE YOU A BETTER COACH AFTER READING THIS?
If so, we have a small favor to ask: more coaches and athletes than ever are reading the TrainHeroic blog, and it's our mission to support them with useful training & coaching content like this. If you found this article useful, please take a moment to share it on social media, engage with the author in the comments below, and link to this article on your blog or any forums you post in. Be your best! - TH Editorial Team

About The Author

Rob Van Valkenburgh joins the TrainHeroic blog with 10 years experience in the strength game. Having coached elite athletes in both the private sector and the Division 1 collegiate setting, Rob believes that strength has to be the foundation of all athletic movement and that athletes of all levels deserve a comprehensive strength program. Rob writes regularly on his own website FootballStrengthCoach.com where here shares short form articles, training tips & programs, and other items related to strength and performance for football.

Comments